A ranar 24 ga Fabrairu, sabon bincike daga mai binciken kasuwa Omdia ya nuna cewa raguwar kayan aikin kera faifan allo (FPD) yana ƙaruwa, wanda zai rage matsin lamba ga masu kera faifan OLED da LCD.

A bisa hasashen Omdia, raguwar kayan aiki na FPD zai karu a yawan karuwar shekara-shekara na kashi 9.3% tsakanin 2021 da 2028. A duk duniya, karfin samar da FPD da ya ragu sosai zai ninka kusan ninki biyu a tsawon wannan lokacin, daga kimanin murabba'in mita miliyan 160 zuwa kusan murabba'in mita miliyan 300.

Rage darajar ƙarfin LCD ya kai kusan kashi biyu bisa uku na jimlar ƙarfin FPD kuma ana hasashen zai karu da kashi 60% daga 2021 zuwa 2028, wanda galibi ke haifar da masana'antun samar da kayayyaki 10.5 da aka gina cikin sauri tsakanin 2017 da 2022. Nan da shekarar 2028, kadarorin da suka ragu na layukan 10.5G za su tashi daga sifili a 2024 zuwa kusan 80%. Ganin cewa masana'antun FPD suna buƙatar saka hannun jari na dala biliyan da yawa, farashin raguwar farashi na iya zama kashi ɗaya bisa uku na jimlar farashin masana'antu a duk aikace-aikacen.

https://www.perfectdisplay.com/27-ips-qhd-280hz-gaming-monitor-2-product/

https://www.perfectdisplay.com/model%ef%bc%9apg27dqo-240hz-product/

https://www.perfectdisplay.com/model-po34do-175hz-product/

A halin yanzu, irin wannan yanayi yana faruwa a masana'antar OLED, musamman ga wuraren samar da OLED na Koriya ta Kudu (WOLED) da kuma wuraren samar da OLED na quantum-dot (QD-OLED). Ana sa ran waɗannan kayayyaki za su kusan rage darajar su gaba ɗaya nan da shekarar 2028, wanda hakan zai rage farashin aiki sosai kuma ya ba da damar samun riba mai ɗorewa a manyan kasuwannin OLED TV da na'urorin sa ido.

Ƙarfin RGB OLED ta amfani da fasahar abin rufe fuska mai kyau (FMM) akan Gen 6 da ƙananan substrates - galibi ga wayoyin komai da ruwanka - zai kuma ga rabon raguwar darajarsa ya tashi daga ƙasa da kashi 10% a 2021 zuwa sama da kashi 60% a 2028.

Omdia ya nuna cewa jinkirin saka hannun jari a sabbin kayan LCD da OLED a cikin 'yan shekarun nan ya rage darajar kadarorin masana'antun cikin sauri. Wannan yana ba su damar sarrafa kayan fasaha a ƙananan ƙimar amfani, samar da fayil ɗin samfura iri-iri, da kuma ci gaba da samun riba a cikin kasuwa mai tsadar farashi.

Duk da haka, sabbin na'urorin OLED na RGB 8.6G da ake ginawa a Koriya ta Kudu da China sun bambanta sosai da wannan yanayin. Omdia ya bayyana cewa waɗannan kayan aikin ba za su amfana da raguwar farashi ba kafin 2030. Wannan zai tura masana'antun su rarraba samarwa da kuma ci gaba da amfani da ƙarfin aiki mai yawa, domin yaɗa farashi mai yawa a kan manyan na'urori.